Solution to the failure of feeding and discharging of automatic self loading concrete mixer truck
The automatic self loading concrete mixer has multiple functions, making the entire construction easier. It is also inevitable that there will be problems in the construction of the automatic loading mixer, such as the loading and unloading is not smooth, there is a phenomenon of material blocking, how to deal with these situations? Let’s take a look at what the auto-feeding mixer truck manufacturers say?
The reason for the pipe blockage in the feeding of the automatic loaders with concrete mixer truck : Sometimes we will use the manual gun to suck the material, in order to facilitate the operation, directly insert the gun into the material barrel, the suction port of the gun is compressed by the solid material, and the strong negative pressure Pulling the full material away will cause great damage to the feeder and easily block the pipeline.
Therefore, it is important to control the correct feeding machine to prevent the automatic feeding mixer truck from being blocked. The correct way is that the material forms a certain air-to-material mixing ratio at the suction port and the air, and flows into the feeder evenly under the push of the airflow. At this time, we need to design the material gun with air supplement function. If the material backlog is too long, it may be very hard. At this time, you need to install an oscillator on the gun to break the agglomerated material.
Do you know about the feeding and discharging of the automatic feeding mixer truck? If you have any questions, you can call us for consultation at any time.
