News

1. Straight-line laying of pipelines: In the process of laying concrete pump pipelines, it is generally necessary to ensure that the pipeline laying lines and pouring points of the pumping equipment are straight, and the curvature is minimized as much as possible. At the same time, the laying of the concrete pump pipe support and the fixing of the pipe must be tight and reliable, and the pipe joints should be sealed and reliable, and the hose and steel pipe should not be mixed together.

1. Concrete placing booms Operators need to go through relevant technical learning and training, carefully read the operating instructions, be familiar with the working principle of the cloth machine, master the working essentials, and be in good health. They can only work after passing the inspection.

1. When the wind speed exceeds level 6, the concrete placing boom is strictly prohibited from working. When the wind speed exceeds level 4, disassembly and assembly of the concrete distributor is strictly prohibited.
2. The placing boom should keep a certain distance from the high-voltage wire relay.

Mobile & walking
The mobile hydraulic distributing machine is composed of distributing placing boom assembly, swivel support, tower body, underframe, concrete pipeline, hydraulic system, electrical system and other components.

With the continuous emergence of high-rise buildings, problems such as high wind load and high pumping have brought great difficulties to the construction of high-rise structures. Among them, the construction of concrete placing boom is a big problem.

The fine-stone concrete pump is a special type of concrete pump. This concrete pump is widely used in floor heating projects and floor construction, so it is welcomed by the majority of construction parties. So on the construction site, what are the pumping requirements of the fine stone concrete pump? Now let’s take a closer look.

In the concrete pumping construction operation, once the pipe blockage occurs, the slight blockage can be dredged by repeated forward and reverse pumps and tapping with a wooden hammer. Serious blockage may need to be removed and replaced. Therefore, prevention of pipe blockage is particularly important.

Concrete pumping equipment

Causes of blocked pipes
With the rapid development of building construction, concrete pumping equipment concrete placing boom has been widely used by construction units. However, in the concrete pouring operation, due to improper use, the phenomenon of equipment pipe blockage occurs from time to time, which not only affects the project progress, but also directly affects the project quality.

The hydraulic concrete placing boom is a kind of terminal equipment used in conjunction with the concrete pump. It is suitable for the construction of high-rise buildings and large-area concrete pouring projects. It can easily and efficiently transport the concrete to the pouring operation point, realize continuous and uniform distribution, and reduce construction costs. Improve the quality of concrete pouring and construction progress.

It is inevitable that there will be some failures when using backhoe loader to be busy for construction. Today we are explaining what is the reason for the failure of the boom.