News

Hydraulic placing boom machine is a kind of terminal equipment used with concrete pump, which is suitable for the construction of high-rise buildings and large-area concrete pouring projects, which improves the quality and construction progress of concrete pouring. However, what type of hydraulic placing boom machine should be used under special construction conditions?

After working for a period of time, everyone will choose a place for vacation. Concrete wet spraying machine is a commonly used concrete wet spraying equipment. After many times of construction, it also needs to be maintained. The cured concrete wet spraying machine can not only help improve construction efficiency and shorten the construction period, but also greatly reduce the labor cost of construction.

The wet spraying machine adopts hydraulic transmission, pumping the concrete to a certain distance or to the nozzle, and then sprays the concrete onto the supporting surface with compressed air. At the same time, add an appropriate amount of accelerator to mix with the concrete at the nozzle to accelerate curing The dosage of the agent is adjusted by the metering pump.

1. Straight-line laying of pipelines: In the process of laying concrete pump pipelines, it is generally necessary to ensure that the pipeline laying lines and pouring points of the pumping equipment are straight, and the curvature is minimized as much as possible. At the same time, the laying of the concrete pump pipe support and the fixing of the pipe must be tight and reliable, and the pipe joints should be sealed and reliable, and the hose and steel pipe should not be mixed together.

1. Concrete placing booms Operators need to go through relevant technical learning and training, carefully read the operating instructions, be familiar with the working principle of the cloth machine, master the working essentials, and be in good health. They can only work after passing the inspection.

1. When the wind speed exceeds level 6, the concrete placing boom is strictly prohibited from working. When the wind speed exceeds level 4, disassembly and assembly of the concrete distributor is strictly prohibited.
2. The placing boom should keep a certain distance from the high-voltage wire relay.

Mobile & walking
The mobile hydraulic distributing machine is composed of distributing placing boom assembly, swivel support, tower body, underframe, concrete pipeline, hydraulic system, electrical system and other components.

With the continuous emergence of high-rise buildings, problems such as high wind load and high pumping have brought great difficulties to the construction of high-rise structures. Among them, the construction of concrete placing boom is a big problem.

The fine-stone concrete pump is a special type of concrete pump. This concrete pump is widely used in floor heating projects and floor construction, so it is welcomed by the majority of construction parties. So on the construction site, what are the pumping requirements of the fine stone concrete pump? Now let’s take a closer look.

In the concrete pumping construction operation, once the pipe blockage occurs, the slight blockage can be dredged by repeated forward and reverse pumps and tapping with a wooden hammer. Serious blockage may need to be removed and replaced. Therefore, prevention of pipe blockage is particularly important.