Industry News

To improve the pumpability of concrete, it is necessary to increase the amount of cement, use a larger water-cement ratio and sand ratio, and use a stricter aggregate gradation, which means an increase in cost or a decrease in quality. A more economical and effective way is to use admixtures to improve the pumpability of concrete. There are many types of additives, among which the admixtures that can improve the pumpability of concrete include air-entraining agents,

How to maintain and repair the wet spray manipulator? Proper repair and maintenance of the wet sprayer can greatly increase its service life.

The maintenance before and after use of the wet spraying machine requires frequent maintenance, so as to maintain its high performance, as smooth as new, reduce the number of failures, and bring greater benefits to the company. The same goes for wet sprayers. As the most advanced shotcrete support equipment in China, the concrete wet shotcrete machine has a wide range of uses, and the construction environment is also extremely complex,

The maintenance before and after use of the wet spraying machine requires frequent maintenance, so as to maintain its high performance, as smooth as new, reduce the number of failures, and bring greater benefits to the company. The same goes for wet sprayers. As the most advanced shotcrete support equipment in China, the concrete wet spraying machine has a wide range of uses and the construction environment is also very complicated

Requirements for Cement Conveyed by Fine Stone Concrete Pump
1. Reduce the frictional resistance of the mechanical part of the concrete with the pump, the conveying pipeline and the interior of the concrete and have good fluidity.

Fine aggregates can be divided into river sand, sea sand, mountain sand and artificial crushed sand according to their sources. The concrete using the former has better pumpability; the artificial sand has a rough surface and poor sand shape, so it is necessary to add some natural sand to improve its proportioning properties, but the artificial sand has better water retention, which can reduce the bleeding and segregation of concrete.

Requirements for Concrete Aggregate Conveying by Fine Stone Concrete Pump

2. Coarse aggregate

Pumped concrete can be made of pebbles, crushed stone or a combination of pebbles and crushed stone.

The laying of the delivery pipe of the pumping wet spray trolley First, whether the laying of the pipeline reasonably affects the construction efficiency and quality of the pumped concrete. The pumping pipeline generally follows the "principle of short straight line between two points", and reduces pipe bends to a great extent. And the utilization rate of the hose, when using the elbow, try to avoid the bending of the elbow is too large.

If the pressure of the concrete pump is too high and unstable, and the oil temperature rises. When the conveying pipe vibrates obviously and the pumping is difficult, it is not allowed to pump forcibly, and the cause should be immediately identified and eliminated. The delivery pipe can be bent first by hitting it with a mallet. Conical pipes, etc., and pump at a slow speed or reverse pump to prevent clogging.

. Concrete pump is a very commonly used concrete pump at present, and has been widely used by major construction units. In the construction process, according to the different engineering conditions and construction environment, users usually use different forms of small concrete delivery pumps.