Industry News

The pumped concrete should be designed in strict accordance with the regulations, the slump should be strictly controlled, and the following principles should be followed. (1) The ratio of the large particle size of the coarse aggregate to the diameter of the conveying pipe should be: when the pumping height is below 50 m, the

Leakage caused by imperfect sealing of the pipeline will affect the quality of concrete pouring on the one hand, and reduce the slump of the concrete and the loss of pumping pressure on the other hand, which will lead to the blockage of the pipeline. The pipeline joint is not tightly sealed, the pipe clamp is loose or the sealing ring is damaged, causing slurry leakage.

The cleaning of the concrete placing boom machine is very important. It is inevitable that some impurities will be left on the concrete placing boom machine after use, which will cause the concrete placing machine to rust. It’s easy to get started when it’s time, and the concrete placing boom machine also needs to be cleaned.

The concrete placing boom is mainly composed of a main beam frame, a balance frame, a supporting seat, and a conveying pipeline.

What preparations need to be made to improve the working efficiency of the wet spray machine

Concrete spreaders are divided into manual concrete placing booms and hydraulic concrete placing booms. According to different pouring environments and individual requirements, develop mobile hydraulic concrete placing booms, walking hydraulic placing booms, independent hydraulic placing booms, elevator shaft climbing hydraulic concrete placing booms, floor slabs Jack-up hydraulic distributing placing boom machine, horizontal hydraulic distributing machineplacing booms, etc.

The fine stone concrete pump is a special type of concrete pump. This concrete pump is widely used in floor heating projects and floor construction, so it is welcomed by the majority of construction parties. So on the construction site, what are the pumping requirements of the fine stone concrete pump? Now let’s take a closer look.

(1) What matters should be paid attention to when entering coarse and fine aggregates?

Coarse aggregate should mainly control its particle size, gradation, grain shape, stone powder content, and mud content. Each vehicle shall undergo a macro inspection, and shall not be unloaded if it is unqualified; in addition, various indicators shall be inspected in batches in accordance with the requirements of the regulations. Fine aggregate should be controlled fineness modulus, mud content

What preparations need to be made to improve the working efficiency of the wet spray machine

In order to ensure the quality of wet spray and improve the efficiency of the wet spray machine, the preparations need to be done before the wet spray machine starts. What kind of preparations need to be done? Next, the author will discuss it for everyone.

A small loader is a heavy-duty mechanical equipment that is often used in construction projects, and it is also one of our more common equipment on the market. The service life and work efficiency of the loader are closely related to the management method of the enterprise. If we are negligent in the maintenance and management of the loader when working with it, it is likely to cause more damage to the equipment in the later period. With the increase in loss,